Custom Figures
User: tribal
password: valiant_47
Aves Apoxie Sculpt
ApoxieŽ Sculpt epoxy clay offers economy as well as performance.
This 2-part product has a putty-like, smooth consistency, and is easy to mix & use.
It is safe and waterproof with 0% shrinkage/cracking! Working time is 2-3 hrs.
Cures hard in 24 hrs and has a semi-gloss finish.
Adheres to plastic, resin kits, wood, metal, ceramic, glass, polymers, foam, fiberglass, & more!
Can be seamlessly feathered before set-up, or sanded, tapped, drilled, carved, lathed, or otherwise tooled after set-up,
without chipping, cracking or flaking! Save time & money on finishing jobs by using ApoxieŽ Sculpt colors.
Aves Apoxie Sculpt
-Link to Aves Tutorial-
Materials:
a. Aves Apoxie Sculpt
b. Jar of Water
c. Toothpicks
d. Medium & Fine Grade Sandpaper
e. Dust Brush
1.) Clean figure to be worked upon.
2.) Mix equal portions of Aves Apoxie Sculpt.
3.) Use dampened toothpick to sculpt.
4.) Smooth over with dampened fingers.
5.) Takes at least 2 hours to get rock hard.
6.) Next day, if you want, use Medium grade sandpaper, then fine grade.
Be sure to "dust off" after sanding.
Look at the cloths, shields, and bases.
Note bear's head robe.
Note Shield.
Note the Base.
-www.sillof.com- -Figure Realm Custom Tutorial-
|
